<u id="r5p76"><progress id="r5p76"></progress></u>
  • <th id="r5p76"><video id="r5p76"></video></th>
  • <th id="r5p76"><option id="r5p76"><acronym id="r5p76"></acronym></option></th>

    <tr id="r5p76"><option id="r5p76"></option></tr> <code id="r5p76"><nobr id="r5p76"><track id="r5p76"></track></nobr></code>
    <strike id="r5p76"></strike>
    <strike id="r5p76"><video id="r5p76"></video></strike>
    歡迎您來到全球機械網! 請登陸 免費注冊

    關注我們

    XYLAN1014/P01931EDEEPMED

    來源:
    比爾安達(上海)潤滑材料有限公司
    日期:
    2021年11月18日
    XYLAN 1014/P01931E DEEP MED. BLUE #524
    APPLICATION INFORMATION:
    This product is designed primarily for spray application. Consult with a Whitford representative if
    other types of application are being considered. Use an air spray gun with a siphon cup or pressure
    pot. Select a fluid nozzle and air cap that meet application needs. The Whitford Laboratory uses a
    Binks Model 2001 gun with a #66S fluid nozzle and a #66SD air cap. The air supply line must be
    equipped with traps to remove water and oil. Drain and service traps frequently.
    Apply the dry film thickness as specified. The proper amount of coating should be achieved with two
    or three passes of the spray gun across the work piece. Apply the coating to a uniform, full wet
    appearance.
    DRY FILM THICKNESS: 0.6 – 1.0 MIL (15 - 25 MICRONS)

    CLEAN UP SOLVENT: NMP/XYLENE - 2:1
    CURING THE COATING:
    In order to completely cure the coating, the SUBSTRATE TEMPERATURE must remain at the
    specified temperature for the entire bake schedule.
    FLASH OR AIR DRY: 1-2 MINUTES AT 150-175°F (65-80°C) OPTIONAL BUT MAY AID TO
    REDUCE SOLVENT POPPING ON LOW MASS PARTS.
    BAKE SCHEDULE: 10 MINS AT 450°F (232°C) STANDARD; 10 MINS AT 525°F (275°C)
    FOR CHEMICAL RESISTANCE; 10 MINS AT 650°F (343°C) FOR
    RELEASE

    免責聲明

    • 以上信息(包括文字、圖片、視頻等)由用戶自行提供,該用戶負責信息內容的真實性、準確性和合法性。全球機械網不提供任何保證,并不承擔任何法律責任。 全球機械網提醒您交易小心謹慎。

    商家檔案

    中文字幕精品无码亚洲字幕说说
    <u id="r5p76"><progress id="r5p76"></progress></u>
  • <th id="r5p76"><video id="r5p76"></video></th>
  • <th id="r5p76"><option id="r5p76"><acronym id="r5p76"></acronym></option></th>

    <tr id="r5p76"><option id="r5p76"></option></tr> <code id="r5p76"><nobr id="r5p76"><track id="r5p76"></track></nobr></code>
    <strike id="r5p76"></strike>
    <strike id="r5p76"><video id="r5p76"></video></strike>